The use of magnetic nanoparticles in low frequency inductive hyperthermia

Abstract

Purpose

The purpose of this paper is to present the basic ideas of magnetic nanoparticles' usage in the breast cancer treatment, which is called magnetic fluid hyperthermia. The proposed approach offers a relatively simple methodology of energy deposition, allowing an adequate temperature control at the target tissue, in this case a cancerous one. By means of a numerical method the authors aim to investigate two heating effects caused by varying magnetic fields, i.e. to compare the power density heating effects of eddy currents and magnetic nanoparticles.

Design/methodology/approach

In order to numerically investigate the combination of the overheating effect of magnetic nanoparticles and eddy currents, the Finite Element Method solver based on FEniCS project has been prepared. To include the magnetic fluid in the model it has been assumed that power losses in the magnetic nanoparticles are completely converted into heat, according to experimentally developed formula. That formula can be interpreted as the hysteresis losses with regard to the volume of magnetic fluid. Finally, the total power density has been calculated as the product of the sum of power density from eddy currents and hysteresis losses. That methodology has been applied to calculate the effectiveness of magnetic fluid hyperthermia with regard to the female breast phantom.

Findings

The paper presents the methodology which can be used in magnetic fluid hyperthermia therapy planning and Computer Aid Diagnosis (CAD). Furthermore, it is shown how to overcome one of the most serious engineering challenges connected with hyperthermia, i.e. achieving adequate temperature in deep tumors without overheating the body surface.

Practical implications

The obtained results connected with the assessment of eddy currents effect suggest that during hyperthermia treatment the configuration which consists of an exciting coil and human body, plays a curial role. Moreover, the authors believe that these results will help to predict the skin surface overheating that accompanies deep heating. The presented methodology can be used by engineers in the development of Computer Aid Diagnosis systems.

Originality/value

In a given patient's situation a number of choices must be made to determine the parameters of the hyperthermia treatment. These include the need of multiple‐point temperature measurements for accurate and thorough monitoring. Treatment planning will require accurate characterization of the applicator deposition pattern and the tissue parameters, as well as the numerical techniques to predict the resultant heating pattern. The presented paper shows how to overcome these problems from the numerical point of view at least.

Citation

Miaskowski, A., Sawicki, B. and Krawczyk, A. (2012), "The use of magnetic nanoparticles in low frequency inductive hyperthermia", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 31 No. 4, pp. 1096-1104. https://doi.org/10.1108/03321641211227348