To read this content please select one of the options below:

Organic substrates for environmentally friendly electronic devices

T. Fischer (Technical University of Ilmenau, Germany)
J. Hähnlein (Technical University of Ilmenau, Germany)
W. Haas (KERAFOL GmbH Eschenbach/OPf, Germany)
V. Landes (KERAFOL GmbH Eschenbach/OPf, Germany)

Circuit World

ISSN: 0305-6120

Article publication date: 1 December 1998

463

Abstract

Legislation in Germany and in many other countries states that electronic devices should be protected against fire. In accordance with this, most electronic and electrical products contain substances which are flame retarding, but have harmful environmental implications. Thus, the protection of the environment makes it necessary to eliminate these harmful substances. The described base material consists of silicone filled with alumina. Silicone is a non‐toxic material. The filler increases the thermal conductivity of the material. As a result of its good thermal properties, the material does not need flame retarding substances, but is still able to satisfy the fire protection requirements. The properties of the material itself and the construction allow the building of an excellent, non‐flame retarded and therefore environmentally friendly 3D‐circuit board.

Keywords

Citation

Fischer, T., Hähnlein, J., Haas, W. and Landes, V. (1998), "Organic substrates for environmentally friendly electronic devices", Circuit World, Vol. 24 No. 4, pp. 25-28. https://doi.org/10.1108/03056129810223936

Publisher

:

MCB UP Ltd

Copyright © 1998, MCB UP Limited

Related articles