On the use of EAS solid‐shell formulations in the numerical simulation of incremental forming processes

Abstract

Purpose

Incremental sheet forming represents a promising process in the manufacturing of metallic components, particularly its variant known as single point incremental forming (SPIF). The purpose of this paper is to test and validate the results coming from numerical simulation of SPIF processes using the reduced enhanced solid‐shell formulation, when compared to the solid finite elements available in ABAQUS software. The use of SPIF techniques in the production of small batch components has a potential wide application in fields such as rapid prototyping and biomechanical devices.

Design/methodology/approach

Incremental forming processes differ from conventional stamping by not using a press and by requiring a lower number of tools, since no dedicated punches and dies are necessary, which lowers the overall production costs. In addition, it shows relative simplicity and flexible setup for complex parts, when compared with conventional technologies. However, the low speed of production and low‐dimensional accuracy levels are still the main obstacles for a wider application of this technique in the context of large production batches.

Findings

In this sense, the use of numerical simulation tools based on the finite element method (FEM) can provide a better understanding of the process' peculiarities. However, there are differences on using distinct finite element formulations, regarding accuracy as well as CPU times during simulations, which can be prohibitive in some cases.

Originality/value

Aiming to provide sounding improvements in these two fields (robustness and cost effectiveness of FEM solutions), the present work encloses a preliminary study about some relevant parameters in the FEM simulation of SPIF. Special focus is given to the use of solid‐shell and solid finite elements, for the sake of generality in modelling, as well as implicit solution schemes for the sake of accuracy. Finally, results coming from both experimental data and commercial FEM packages are compared to those obtained by a reliable and cost‐effective solid‐shell finite element formulation developed and implemented by the authors.

Citation

Sena, J.I.V., Alves de Sousa, R.J. and Valente, R.A.F. (2011), "On the use of EAS solid‐shell formulations in the numerical simulation of incremental forming processes", Engineering Computations, Vol. 28 No. 3, pp. 287-313. https://doi.org/10.1108/02644401111118150