To read this content please select one of the options below:

Prediction of crack pattern distribution in reinforced concrete by coupling a strong discontinuity model of concrete cracking and a bond‐slip of reinforcement model

Norberto Dominguez (Laboratoire de Mécanique et Technologie (LMT), Ecole Normale Superieure de Cachan, Cachan, France)
Delphine Brancherie (Laboratoire Roberval, Université de Technologie de Compiègne, Compiègne, France)
Luc Davenne (Laboratoire de Mécanique et Technologie (LMT), Ecole Normale Superieure de Cachan, Cachan, France)
Adnan Ibrahimbegović (Laboratoire de Mécanique et Technologie (LMT), Ecole Normale Superieure de Cachan, Cachan, France)

Engineering Computations

ISSN: 0264-4401

Article publication date: 1 July 2005

1739

Abstract

Purpose

To provide a reinforced concrete model including bonding coupled to a classical continuum damage model of concrete, capable of predicting numerically the crack pattern distribution in a RC structure, subjected to traction forces.

Design/methodology/approach

A new coupling between bonding model and an alternative model for concrete cracking is proposed and analyzed. For concrete, proposes a damage‐like material model capable of combining two types of dissipative mechanisms: diffuse volume dissipation and localized surface dissipation.

Findings

One of the most important contributions is the capacity of predicting maximal and minimal spacing of macro‐cracks, even if the exact location of cracks remains undetermined. Another contribution is to reiterate on the insufficiency of the local damage model of concrete to handle this class of problems; much in the same manner as for localization problem which accompany strain‐softening behavior.

Practical implications

Bonding becomes very important to evaluate both the integrity and durability of a RC structure, or in particular to a reliable prediction of crack spacing and opening, and it should be integrated in future analysis of RC.

Originality/value

Shows that introduction of the influence of concrete heterogeneities in numerical analysis can directly affect the configuration of the crack pattern distribution. Use of a strong discontinuity approach provides additional cracking information like opening of macro‐cracks.

Keywords

Citation

Dominguez, N., Brancherie, D., Davenne, L. and Ibrahimbegović, A. (2005), "Prediction of crack pattern distribution in reinforced concrete by coupling a strong discontinuity model of concrete cracking and a bond‐slip of reinforcement model", Engineering Computations, Vol. 22 No. 5/6, pp. 558-582. https://doi.org/10.1108/02644400510603014

Publisher

:

Emerald Group Publishing Limited

Copyright © 2005, Emerald Group Publishing Limited

Related articles