To read this content please select one of the options below:

The flexural strength of earth‐block masonry for sustainable walling

Colin Williams (WCK Design and Conservation, Dereham, UK)
Steve Goodhew (School of Architecture, Design and the Built Environment, Nottingham Trent University, Nottingham, UK)
Richard Griffiths (School of Architecture, Design and the Built Environment, Nottingham Trent University, Nottingham, UK)

Structural Survey

ISSN: 0263-080X

Article publication date: 5 April 2011

702

Abstract

Purpose

The purpose of the paper is to explore the structural feasibility of substituting traditional thick joint mortars with earth slurry mortars modified with varying amounts of sand. Thin jointing of earth blocks would reduce the cost of sustainable earth construction.

Design/methodology/approach

Compressive strength of earth‐block cubes was determined. Flexural strength was measured using the BRE electronic bond wrench, which enables block couplets to be tested quickly and accurately. Three samples of earth block, one from southwest England and two from East Anglia, together with nine examples of earth slurry mortar jointing were studied, including the effect of reinforcing the joint and or the block using hessian.

Findings

The 28‐day cube characteristic compressive strengths were determined for Appley soil, Norfolk lump and Beeston soil, the last with 0 per cent sand, 25 per cent sand and with 25 per cent sand with hessian. The flexural strengths of Appley and Beeston earth slurries were determined, along with Thermalite thin jointed cement and cement mortar for comparison. The Beeston soil flexural strength increased with increasing sand content. Earth slurry with 40 per cent sand and hessian present in the joint gave the greatest strength. It is important to use blocks and slurry mortars of the same soil. Extruded and compressed earth blocks are best suited to slurry jointing.

Originality/value

This work successfully demonstrates the structural feasibility of carefully reducing the thickness of earth mortars when constructing sustainable earth block walling. Characteristic flexural strengths are suggested where the test results were sufficiently consistent, and of a magnitude likely to be useful in design.

Keywords

Citation

Williams, C., Goodhew, S. and Griffiths, R. (2011), "The flexural strength of earth‐block masonry for sustainable walling", Structural Survey, Vol. 29 No. 1, pp. 46-62. https://doi.org/10.1108/02630801111118403

Publisher

:

Emerald Group Publishing Limited

Copyright © 2011, Emerald Group Publishing Limited

Related articles