To read this content please select one of the options below:

Strip double sensing layer pressure sensor for interface pressure distribution

Zhou Gaofeng (State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China)
Zhao Yulong (State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China)
Jiang Zhuangde (State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China)

Sensor Review

ISSN: 0260-2288

Article publication date: 27 March 2009

571

Abstract

Purpose

The flexibly thin film grid pressure sensor is mainly used to detect the interface pressure distribution between touching objects. Aim at larger measurement error, the strip double sensing layer pressure sensor are designed and fabricated and tested.

Design/methodology/approach

Defects and characteristic of the flexibly thin film grid pressure sensor based on piezoresistive effect are analyzed and pointed out in this paper. After comparison of four sensors, the strip double sensing layer pressure sensor was thought to be best.

Findings

Experiment shows that the strip double sensing layer pressure sensor could eliminate the measurement error basically and illustrates the validity of measuring the interface pressure distribution between area touching objects.

Research limitations/implications

In this paper, only the strip double sensing layer pressure sensor was used to verify the validity of measuring the static interface pressure distribution between peach and platform. But there also exists some problems such as the adhering reliability of electrode and the unevenness of sensing layer. These problems could be overcome in the future research if the fabricating procedure and ingredient of material could be adjusted correctly.

Practical implications

The strip double sensing layer pressure sensor could be applied to detect the static interface pressure distribution such as peach pressure distribution. For dynamic measurement, this research needs to be done further.

Originality/value

Strip double sensing layer pressure sensor with simple “interlayer” structure and with low manufacture cost is presented to basically eliminate the measurement error of interface pressure distribution of original sensor.

Keywords

Citation

Gaofeng, Z., Yulong, Z. and Zhuangde, J. (2009), "Strip double sensing layer pressure sensor for interface pressure distribution", Sensor Review, Vol. 29 No. 2, pp. 148-156. https://doi.org/10.1108/02602280910936255

Publisher

:

Emerald Group Publishing Limited

Copyright © 2009, Emerald Group Publishing Limited

Related articles