Alignment of parts in automatic assembly using vibrations

Abstract

Purpose

The paper aims to investigate theoretically and experimentally vibrational alignment of parts in an assembly position under kinematical excitement of the movably based part.

Design/methodology/approach

Presents developed mathematical model for vibrational alignment when the kinematical excitement of movable part is applied along the insertion axis. Dependencies of alignment duration on stiffness of basing elements and excitation frequency were defined numerically solving the mobile‐based part alignment equations. Alignment experiments of rectangular cross‐section and cylindrical parts under kinematical excitement were carried out.

Findings

The mathematical model and the experiments have demonstrated that alignment of the parts being assembled happens due to directed displacement of the movable part resulted by certain parameters of the system and excitement. In the course of the displacement, mating surfaces are aligned and the final mutual orientation of the parts before insertion is realized. Experiments have proved validity of the developed mathematical model. This process reduces allowable axial non‐coincidence and angular misfit of the parts to be assembled.

Research limitations/implications

Impact and non‐impact regimes of the displacement exist depending on the excitement amplitude and initial contact force between the parts. Also, during the vibrational alignment it is possible to control dry friction force between parts by additional high frequency vibrations. Besides, the vibrational excitement can be not only harmonic, but also impulse, bi‐harmonic, etc. Only non‐impact regime of the motion without dry friction force control was investigated and presented in the paper.

Practical implications

The paper investigates the vibrational alignment method based on the directed vibrational displacement of the connecting part, which does not require high preciseness of the interdependent position of the parts in the assembly position.

Originality/value

Vibrational assembly devices of directional action enable compensation of errors of the parts' mutual positioning without use of sensors, feedback systems and control algorithms.

Citation

Baksys, B. and Puodziuniene, N. (2007), "Alignment of parts in automatic assembly using vibrations", Assembly Automation, Vol. 27 No. 1, pp. 38-43. https://doi.org/10.1108/01445150710724694