Study on the multi‐manipulator tooth‐arrangement robot for complete denture manufacturing

Abstract

Purpose

It is not an easy and simple task to manufacture a complete denture with high quality. Traditionally, it often needs a medical expert with experience and hand‐on skill, due to the manual way of denture manufacturing. The purpose of this paper is to implement the multi‐manipulator tooth‐arrangement robot system that can fully automate the denture manufacturing process.

Design/methodology/approach

A novel complete denture manufacturing mechanism is designed, which is based on the multi‐manipulator and dental arch generator. The visual tooth‐arrangement and robot control software is developed in VC++6.0. Preliminary experiments on tooth‐arrangement have been conducted using the proposed multi‐manipulator tooth‐arrangement robot prototype system.

Findings

The multi‐manipulator tooth‐arrangement robot prototype system can automatically design and manufacture a set of complete denture that fit a patient by visual tooth‐arrangement and robot control software according to the patient's jaw arch parameters.

Research limitations/implications

The implication of research is that it is feasible that the manufacture strategy of complete denture fulfilled by multi‐manipulator tooth‐arrangement robot. The limitation of research is that it is difficult to realize coordinate control.

Originality/value

The traditional manual method which makes complete denture by medical personal experience will be changed after the multi‐manipulator tooth‐arrangement robot system is manufactured, and adjustment to each tooth position and orientation will be realized by this system.

Citation

Yong‐de, Z., Jin‐gang, J., Pei‐jun, L. and Yong, W. (2011), "Study on the multi‐manipulator tooth‐arrangement robot for complete denture manufacturing", Industrial Robot, Vol. 38 No. 1, pp. 20-26. https://doi.org/10.1108/01439911111097814