TY - JOUR AB - Purpose– The paper aims to study the friction behaviour of alumina and zirconia against steel DIN‐Ck45K under water lubricated conditions.Design/methodology/approach– The tests were performed with a contact stress of 3.5 MPa and a constant sliding velocity of 0.5 m/s for 5.35 km of sliding distance, using a pin‐on‐disk tribometer.Findings– The friction coefficient and the energy dissipated in the contact were considered in this comparative study. The zirconia ceramic present less friction coefficient and contact temperature than alumina ceramic. The zirconia present about 70 per cent of the energy dissipated against when compared with the alumina. Abrasive scars of the surface ploughing were observed on every wear track for two pairs in contact.Research limitations/implications– This research used only one test condition.Originality/value– The paper describes the tribological conditions used and a new methodology based on the energy dissipated in the contact is proposed. VL - 60 IS - 4 SN - 0036-8792 DO - 10.1108/00368790810881515 UR - https://doi.org/10.1108/00368790810881515 AU - Paulo Davim J. AU - Santos Edgar AU - Pereira Catarina AU - Ferreira J.M.F. PY - 2008 Y1 - 2008/01/01 TI - Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions T2 - Industrial Lubrication and Tribology PB - Emerald Group Publishing Limited SP - 178 EP - 182 Y2 - 2024/03/28 ER -