TY  - JOUR
AB  - Purpose– The purpose of this paper is to investigate the efficiency of cutting fluids when end milling AISI 304 stainless steels.Design/methodology/approach– Two groups of cutting tests were conducted, one with the application of a coolant (wet machining) and the other – without (dry cutting), using multilayer coated carbide inserts. The findings of tool life and tool wear mechanisms are compared.Findings– Coolant application proves to be efficient at low‐cutting speeds. With increasing the cutting speed, the coolant effect on improving tool life becomes less significant. Built‐up edge and nose wear are the dominant failure mechanisms in dry machining, while in wet machining, the dominant mechanisms are found to be notch wear and cutting edge grooving.Originality/value– This paper provides useful information for manufacturing engineers dealing with end milling of stainless steel components. It helps select beneficial cutting conditions for dry and wet end milling operations.
VL  - 60
IS  - 3
SN  - 0036-8792
DO  - 10.1108/00368790810871039
UR  - https://doi.org/10.1108/00368790810871039
AU  - Abou‐El‐Hossein K.A.
PY  - 2008
Y1  - 2008/01/01
TI  - Cutting fluid efficiency in end milling of AISI 304 stainless steel
T2  - Industrial Lubrication and Tribology
PB  - Emerald Group Publishing Limited
SP  - 115
EP  - 120
Y2  - 2024/04/16
ER  -