To read the full version of this content please select one of the options below:

Study of supply cut‐off and bearing geometric parameters on design of hybrid journal bearing

Vijay Kumar Jadon (Mechanical Engineering Department, Thapar Institute Engineering and Technology, Patiala, India)
Madhvender Singh (Mechanical Engineering Department, Thapar Institute Engineering and Technology, Patiala, India)

Industrial Lubrication and Tribology

ISSN: 0036-8792

Article publication date: 13 March 2007

Abstract

Purpose

Hybrid bearings have found increasing applications in various machines owing to their large number of favorable characteristics like high load carrying capacity, increased minimum fluid film thickness, long life and increased damping making them attractive for various applications such as turbo machinery, machine tool spindles, precision grinder spindles, etc. A careful design of such bearing for optimum performance has always been among the key issues of the researchers. The present work has been carried out to study the effect of bearing geometric parameters on performance of hybrid journal bearing and supply cut‐off behavior has also been studied for the improved performance.

Design/methodology/approach

The generalized Reynold's equation governing the fluid flow in the clearance space between bearing and journal has been solved using finite element method to determine the pressure distribution, subsequently performance of hole‐entry hybrid journal bearing are computed. The journal centre equilibrium position for the given load is computed and the formulation is explained. The geometric parameters include aspect ratio, land width ratio, number of rows and number of holes per row. Further, performance of the bearing is computed with increasing the load, which induces negative pressure or the backpressure at the supply holes subsequently those are plugged to support the higher load.

Findings

The obtained results are presented in graphical form and logical conclusions are drawn and the modified configurations with reduced number of holes are suggested for higher load. It is observed that the bearing configuration with aspect ratio = 1.0 and land width ratio = 0.2 is best for high load support for low power requirement as less lubricant is required to be pumped in the bearing yet it provides sufficient fluid film thickness and lower values of maximum pressure. The load carrying capacity of the bearing can be further increased by plugging the holes on which backpressure is obtained for same bearing configuration. A feedback control with hybrid bearing system will sustain the sudden increase of load by shutting off the supply of the lubricant through supply hole where negative pressure is encountered.

Originality/value

The paper addresses the performance of non recessed hybrid journal bearings with wide range of geometric parameter. The results are quite useful for the bearing designer. The supply cut‐off is another aspect of originality of the paper as it provides the better load support.

Keywords

Citation

Jadon, V.K. and Singh, M. (2007), "Study of supply cut‐off and bearing geometric parameters on design of hybrid journal bearing", Industrial Lubrication and Tribology, Vol. 59 No. 2, pp. 92-102. https://doi.org/10.1108/00368790710731909

Publisher

:

Emerald Group Publishing Limited

Copyright © 2007, Emerald Group Publishing Limited