TY  - JOUR
AB  - The surface coating of drill bits improves the tool life considerably and enhances the end product quality. The improved coating is desirable for long service operations. One of the methods to achieve this is to develop an interface layer between the coat and the tool base such that the transition of shear properties occurs across the interface layer. The application of duplex treatment (plasma pre‐nitriding before PVD TiN coating) to the tool surface becomes fruitful in this regard. In the present study, the wear properties of the duplex treated and untreated M7 HSS twist drill bits are examined. The wear tests are conducted on a dry base, and the feed rate and rotational speed are kept constant during the drilling tests. SEM and EDS are conducted to analyze the wear properties and metallurgical changes on the tool surface after the tests. It is found that the build up edge forms on the untreated tool surface, which in turn results in adhesion and abrasive wear. In the case of duplex treated drill bit, thinning of TiN coat is observed, but the coat is neither partially nor totally pealed off from the tool surface in the wear land.
VL  - 52
IS  - 1
SN  - 0036-8792
DO  - 10.1108/00368790010308401
UR  - https://doi.org/10.1108/00368790010308401
AU  - Yilbas B.S.
AU  - Rashid M.
AU  - Nizam M.
PY  - 2000
Y1  - 2000/01/01
TI  - Comparative study of wear mechanism of duplex treated M7 HSS drill bits
T2  - Industrial Lubrication and Tribology
PB  - MCB UP Ltd
SP  - 30
EP  - 35
Y2  - 2024/04/25
ER  -