3,5‐Bis(2‐thienyl)‐4‐amino‐1,2,4‐triazole as a corrosion inhibitor for copper in acidic media

Abstract

Purpose

The aim of this paper is to investigate inhibition of copper corrosion by 3,5‐bis(2‐thienyl)‐4‐amino‐1,2,4‐triazole (2‐TAT) in 1 M HCl and 0.5 M H₂SO₄.

Design/methodology/approach

Potentiodynamic polarization curves and electrochemical impedance measurements were carried out on copper in 1 M HCl and 0.5 M H₂SO₄ containing various concentrations of 2‐TAT, and the effects of temperature were also investigated.

Findings

As an efficient inhibitor, 2‐TAT behaves better in 1 M HCl than in 0.5 M H₂SO₄. 2‐TAT can be classified as cathodic‐type corrosion inhibitor in 1 M HCl and acts as relatively mixed type in 0.5 M H₂SO₄. Activation energies in the presence and absence of 2‐TAT were obtained by measuring the temperature independence of corrosion current. Adsorption of the inhibitor on the copper surface was found to obey the Langmuir adsorption isotherm.

Practical implications

This inhibitor could have application in industries where hydrochloric acid solutions are used to remove scale and salts from copper surfaces and may render dismantling unnecessary.

Originality/value

The results from this paper showed that 2‐TAT could be considered as a suitable inhibitor for copper in acidic media.

Citation

Tang, Y., Chen, Y., Yang, W., Yin, X., Liu, Y. and Wang, J. (2010), "3,5‐Bis(2‐thienyl)‐4‐amino‐1,2,4‐triazole as a corrosion inhibitor for copper in acidic media", Anti-Corrosion Methods and Materials, Vol. 57 No. 5, pp. 227-233. https://doi.org/10.1108/00035591011075850