Severe corrosion in a waste incinerator plant due to flue gas and steam leakage

Abstract

In a new build waste incinerator, the waste (refuse derived fuel) was burned on a discontinuous moving grate. Frequent furnace overpressure peaks occurred because of this firing method and as a result, flue gas and fly‐ash were pushed out of the boiler and into the building. During the plant start up period, a seal in a water‐feed pipeline broke, and a large amount of condensed steam was discharged into the boiler house. Shortly thereafter, very severe corrosion was noticed on the galvanised gangways, steel building components, the boiler aluminium sheeting and on processing lines. A theoretical study of the condensation of the flue gas indicated that sulphuric acid would condense before it reached the external aluminium sheeting and that under normal conditions, dry hydrochloric acid fumes would be removed by the boiler house ventilators. However, the steam leakage had caused the hydrochloric acid to be dissolved in the condensed water and that had resulted in the severe corrosion damage, which had become evident subsequently.

Citation

de Weijer, T. and Huijbregts, W. (2003), "Severe corrosion in a waste incinerator plant due to flue gas and steam leakage", Anti-Corrosion Methods and Materials, Vol. 50 No. 5, pp. 334-340. https://doi.org/10.1108/00035590310492243