To read this content please select one of the options below:

Integrity monitoring using ERAIM for GNSS/inertial system

Haiying Liu (Academy of Frontier Science, Nanjing University of Aeronautics and Astronautics, Nanjing, China)
Weisong Ye (Academy of Frontier Science, Nanjing University of Aeronautics and Astronautics, Nanjing, China)
Huinan Wang (Academy of Frontier Science, Nanjing University of Aeronautics and Astronautics, Nanjing, China)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 31 August 2012

497

Abstract

Purpose

The purpose of this paper is to develop an integrity monitoring method using ERAIM (Extended Receiver Autonomous Integrity Monitoring) for the integrated GNSS/Inertial (Global Navigation Satellite System and inertial navigation system) of general aviation aircraft.

Design/methodology/approach

First the tightly integrated GNSS with Strapdown Inertial Navigation System (GNSS/SINS) and the Kalman filter is designed. Then the processing of ERAIM is presented, in which the least‐squares theory is used to calculate the best estimators by integrating the predicted states with measurement states of Kalman filter. Based on the new measurement model, the integrity monitoring for GNSS/inertial system is carried out, including the fault detection, identification, reliability and separability. Lastly, the simulation and analysis for ERAIM vs RAIM are performed to validate the proposed method.

Findings

Simulation results show that the ERAIM method is able to detect and identify effectively any type of failure including step failure and ramp failure. Compared to the RAIM method for only GNSS, the ERAIM increases the redundant information and reduces the correlation of test statistics, as well as enhancing the reliability and thus can significantly improve the performance of integrity monitoring.

Practical implications

In safety critical sectors such as aviation, stringent integrity performance requirements must be met. The ERAIM method cannot only be used in integrity monitoring for the integrated GNSS/Inertial system, but also can be applied to only GNSS or other integrated navigation systems for general aviation aircraft.

Originality/value

The paper presents a new integrity monitoring method of ERAIM, which is able to improve the fault detection and identification capabilities significantly by extending GNSS‐used RAIM method into the GNSS/Inertial integrated system.

Keywords

Citation

Liu, H., Ye, W. and Wang, H. (2012), "Integrity monitoring using ERAIM for GNSS/inertial system", Aircraft Engineering and Aerospace Technology, Vol. 84 No. 5, pp. 287-292. https://doi.org/10.1108/00022661211255467

Publisher

:

Emerald Group Publishing Limited

Copyright © 2012, Emerald Group Publishing Limited

Related articles