Search results

Improving reliability is a key factor in reducing the cost of wind energy, which is strongly influenced by the cost of maintenance operations. In this context, this paper aims to propose a degradation model that describes the phenomenon of fault propagation to apply proactive maintenance that will act on the cause of failure to prevent its reoccurrence as well as to improve future system designs.

The methodology adopted consists in identifying the different components of a wind turbine, their causes and failure modes, and then, classifying these components according to their causes of failure.

The result is a classification of the different components of a wind turbine according to their failure causes. From the obtained classification, the authors observed that the failure modes for one component are a failure cause for another component, which describes the phenomenon of failure propagation.

The different classifications existing in the literature depend on the nature, position and function of the different components. The classification of this study consists in grouping the components of a wind turbine according to their failure causes to develop a degradation model considering the propagation of failure in the field of wind turbines.

Wind energy has matured to a level of development at which it is ready to become a generally accepted power generation technology. The aim of this paper is to provide a brief review of the state of the art in the area of electrical machines and power‐electronic systems for high‐power wind energy generation applications. As the first part of this paper, latest market penetration, current technology and advanced electrical machines are addressed.

After a short description of the latest market penetration of wind turbines with various topologies globally by the end of 2010 is provided, current wind power technology, including a variety of fixed‐ and variable‐speed (in particular with doubly‐fed induction generator (DFIG) and permanent magnet synchronous generator (PMSG) supplied with partial‐ and full‐power converters, respectively) wind power generation systems, and modern grid codes, is presented. Finally, four advanced electrical‐machine systems, viz., brushless DFIG, open winding PMSG, dual/multi 3‐phase stator‐winding PMSG and magnetic‐gear outer‐rotor PMSG, are identified with their respective merits and challenges for future high‐power wind energy applications.

For the time being, the gear‐drive DFIG‐based wind turbine is significantly dominating the markets despite its defect caused by mechanical gears, slip rings and brush sets. Meanwhile, direct‐drive synchronous generator, especially utilizing permanent magnets on its rotor, supplied with a full‐capacity power converter has become a more effective solution, particularly in high‐power offshore wind farm applications.

This first part of the paper reviews the latest market penetration of wind turbines with a variety of mature topologies, by summarizing their advantages and disadvantages. Four advanced electrical‐machine systems are selected and identified by distinguishing their respective merits and challenges for future high‐power wind energy applications.

Wind power is an important source of renewable energy and accounts for significant portions in supplying electricity in many countries and locations. The purpose of this paper is to develop a method for wind power system reliability assessment and condition-based maintenance (CBM) optimization considering both turbine and wind uncertainty. Existing studies on wind power system reliability mostly considered wind uncertainty only and did not account for turbine condition prediction.

Wind power system reliability can be defined as the probability that the generated power meets the demand, which is affected by both wind uncertainty and wind turbine failures. In this paper, a method is developed for wind power system reliability modeling considering wind uncertainty, as well as wind turbine condition through health condition prediction. All wind turbine components are considered. Optimization is performed for maximizing availability or minimizing cost. Optimization is also conducted for minor repair activities to find the optimal number of joint repairs.

The wind turbine condition uncertainty and its prediction are important for wind power system reliability assessment, as well as wind speed uncertainty. Optimal CBM policies can be achieved for optimizing turbine availability or maintenance cost. Optimal preventive maintenance policies can also be achieved for scheduling minor repair activities.

This paper considers uncertainty in both wind speed and turbine conditions and incorporates turbine condition prediction in reliability analysis and CBM optimization. Optimization for minor repair activities is studied to find the optimal number of joint repairs, which was not investigated before. All wind turbine components are considered, and data from the field as well as reported studies are used.

Power‐electronic systems have been playing a significant role in the integration of large‐scale wind turbines into power systems due to the fact that during the past three decades power‐electronic technology has experienced a dramatic evolution. This second part of the paper aims to focus on a comprehensive survey of power converters and their associated control systems for high‐power wind energy generation applications.

Advanced control strategies, i.e. field‐oriented vector control and direct power control, are initially reviewed for wind‐turbine driven doubly fed induction generator (DFIG) systems. Various topologies of power converters, comprising back‐to‐back (BTB) connected two‐ and multi‐level voltage source converters (VSCs), BTB current source converters (CSCs) and matrix converters, are identified for high‐power wind‐turbine driven PMSG systems, with their respective features and challenges outlined. Finally, several control issues, viz., basic control targets, active damping control and sensorless control schemes, are elaborated for the machine‐ and grid‐side converters of PMSG wind generation systems.

For high‐power PMSG‐based wind turbines ranging from 3 MW to 5 MW, parallel‐connected 2‐level LV BTB VSCs are the most cost‐effective converter topology with mature commercial products, particularly for dual 3‐phase stator‐winding PMSG generation systems. For higher‐capacity wind‐turbine driven PMSGs rated from 5 MW to 10 MW, medium voltage multi‐level converters, such as 5‐level regenerative CHB, 3‐ and 4‐level FC BTB VSC, and 3‐level BTB VSC, are preferred. Among them, 3‐level BTB NPC topology is the favorite with well‐proven technology and industrial applications, which can also be extensively applicable with open‐end winding and dual stator‐winding PMSGs so as to create even higher voltage/power wind generation systems. Sensorless control algorithms based on fundamental voltages/currents are suggested to be employed in the basic VC/DPC schemes for enhancing the robustness in the entire PMSG‐based wind power generation system, due to that the problems related with electromagnetic interferences in the position signals and the failures in the mechanical encoders can be avoided.

This second part of the paper for the first time systematically reviews the latest state of arts with regard to power converters and their associated advanced control strategies for high‐power wind energy generation applications. It summarizes a variety of converter topologies with pros and cons highlighted for different power ratings of wind turbines.

Wind turbines are of growing importance for the production of renewable energy. The kinetic energy of the blowing air induces a rotary motion and is thus converted into electricity. From the mechanical point of view the complex dynamics of wind turbines become a matter of interest for structural optimization and optimal control in order to improve stability and energy efficiency. The purpose of this paper therefore is to present a mechanical model of a three‐blade wind turbine with a momentum and energy conserving time integration of the system.

The authors present a mechanical model based upon a rotationless formulation of rigid body dynamics coupled with flexible components. The resulting set of differential‐algebraic equations will be solved by using energy‐consistent time‐stepping schemes. Rigid and orthotropic‐elastic body models of a wind turbine show the robustness and accuracy of these schemes for the relevant problem.

Numerical studies prove that physically consistent time‐stepping schemes provide reliable results, especially for hybrid wind turbine models.

The application of energy‐consistent methods for time discretization is intended to provide computational robustness and to reduce the computational costs of the dynamical wind turbine systems. The model is aimed to give a first access into the investigation of fluid‐structure interaction for wind turbines.

Wind energy has become a distinguished field of energy among the alternative energy resources. Despite economical disadvantages, the production of wind energy is desired to fulfill the demand of the energy. Low reliability is a big issue in the development of wind energy technology that has affected wind farm operations. The purpose of the study is to find the reason for the low reliability and high downtime for wind turbines.

The systems engineering approach has a high success rate in handling complex systems such as wind farms. A failure finding model is presented based on the systems engineering, with the focus to analyze the failures at the interfaces. The required data have been collected by reviewing the literature.

Gear box interfaces are a vital reason for the higher downtime and frequent failures of wind turbines, and the bearing and the lubricant in the gear box are affected because of their inappropriate combination.

The reliability and the maintainability of the wind turbine is a topic of major importance. The study is an attempt to contribute to a more sophisticated solution to the reliability problem of the wind turbine. Moreover, it shows the importance of interfaces in designing the complex systems.

The purpose of this paper is to review the operation and maintenance practices within wind power applications and to clarify practical needs as gaps between researchers and practitioners.

The paper collects, categorizes, and analyzes the published literature of both researchers and practitioners systematically.

The paper defines significant issues in operation and maintenance of wind energy related to: site and seasonal asset disturbances; stakeholders’ requirements trade‐off; dependability and asset deterioration challenges; diagnostic, prognostic and information and communication technologies (ICTs) applications; and maintenance optimization models. Within each category, the gaps and further research needs have been extracted with respect to both an academic and industrial perspective.

The use of wind energy is growing rapidly and the associated practices related to maintenance and asset management are still lacking. Therefore, the literature review of operation and maintenance is a necessity to uncover the holistic issues and interrelationships of what has so far been published as detailed and fragmented topics to specific issues. Wind energy assets represent modern renewable energy assets which are affected by environmental disturbances, rapid technological development, rapid scaling‐up processes, the stochastic and dynamic nature of operations and degradation, the integrity and interoperability of system‐to‐support.

The paper provides a comprehensive review of research contributions and industrial development efforts. That will be useful to the life cycle stakeholders in both academia and industry in understanding the maintenance problem and solution space within the wind energy context.

Sustainable energy has been on the political agenda in Denmark for decades. This chapter will highlight how wind turbine production quite unforeseen became a great success in Denmark before the turn of the Millennium. An integrative public leadership approach using a mix of supportive institutional designs and instruments, combined with an unexpected bottom-up pressure for alternatives to nuclear power, promoted ways for wind turbine innovation and production in the 1970s. After the turn of the Millennium, being a huge financial success creating many new jobs and export has it developed into a cluster based on huge investments and professionalised developers. The comprehensive transition of wind turbine production in Denmark, from small scale to large scale, has however provided a counterproductive decrease in community commitment for local renewable energy production.

Denmark is known internationally as a climate frontrunner and not only due to wind turbine production and planning. The status is obtained by polycentric governance applied in cooperative-owned energy systems. The Danish response to climate change is a concerted effort of a plethora of public and private actors, providing a crucial momentum and robustness in climate politics not at least generated from a genuine civic society involvement. ‘The Danish Energy Model’; a withhold strategic effort to combine ambitious renewable energy goals, energy efficiency targets and political support of technical and industrial development has for four decades, succeeded in providing high levels of cheap energy supply, while partly reducing fossil fuel dependency at the same time.

Barge-type offshore floating wind turbine (OFWT) commonly exhibits an under-actuated phenomenon in an offshore environment, which leads to a potential vibration-damping hazard. This article aims to provide a new robust output feedback anti-vibrational control scheme for the novel translational oscillator with rotational actuator (TORA) based five-degrees of freedom (5-DOF) barge-type OFWT in the presence of unwanted disturbances and modeling uncertainties.

In this paper, an active control technique called TORA has been used to design a 5-DOF barge-type OFWT model, where the mathematical model of the proposed system is derived by using Euler–Lagrange's equations. The robust hierarchical backstepping integral nonsingular terminal sliding mode control (HBINTSMC) with an adaptive gain is used in conjunction with extended order high gain observer (EHGO) to achieve system stabilization in the presence of unwanted disturbances and modeling uncertainties. The numerical simulations based on MATLAB/SIMULINK have been performed to demonstrate the feasibility and effectiveness of the proposed model and control law.

The numerical simulation results affirm the accuracy and efficiency of the proposed control law for the TORA based OFWT system. The results demonstrate that the proposed control law is robust against unwanted disturbances and uncertainties. The unknown states are accurately estimated by EHGO which enables the controller to exhibit improved stabilization performance.

A new mathematical model of the 5-DOF barge-type OFWT system based on TORA is the major contribution of this research paper. Furthermore, it provides a new adaptive anti-vibration control scheme by incorporating the EHGO for the proposed model.

This paper aims to design an optimum vertical axis wind turbine (VAWT) and assess its techno-economic performance for wind energy harvesting at high-speed railway in Malaysia.

This project adopted AutoCAD and ANSYS modeling tools to design and optimize the blade of the turbine. The site selected has a railway of 30 km with six stops. The vertical turbines are placed 1 m apart from each other considering the optimum tip speed ratio. The power produced and net present value had been analyzed to evaluate its techno-economic viability.

Computational fluid dynamics (CFD) analysis of National Advisory Committee for Aeronautics (NACA) 0020 blade has been carried out. For a turbine with wind speed of 50 m/s and swept area of 8 m², the power generated is 245 kW. For eight trains that operate for 19 h/day with an interval of 30 min in nonpeak hours and 15 min in peak hours, total energy generated is 66 MWh/day. The average cost saved by the train stations is RM 16.7 mil/year with battery charging capacity of 12 h/day.

Wind energy harvesting is not commonly used in Malaysia due to its low wind speed ranging from 1.5 to 4.5 m/s. Conventional wind turbine requires a minimum cut-in wind speed of 11 m/s to overcome the inertia and starts generating power. Hence, this paper proposes an optimum design of VAWT to harvest an unconventional untapped wind sources from railway. The research finding complements the alternate energy harvesting technologies which can serve as reference for countries which experienced similar geographic constraints.