Search results

Studying the shear stress and pressure resulting on the walls of blood vessels, especially during high-pressure cases, which may lead to the explosion or rupture of these vessels, can also lead to the death of many patients. Therefore, it was necessary to try to control the shear and normal stresses on these veins through nanoparticles in the presence of some external forces, such as exposure to some electromagnetic shocks, to reduce the risk of high pressure and stress on those blood vessels. This study aims to examines the shear and normal stresses of electroosmotic-magnetized Sutterby Buongiorno’s nanofluid in a symmetric peristaltic channel with a moderate Reynolds number and curvature. The production of thermal radiation is also considered. Sutterby nanofluids equations of motion, energy equation, nanoparticles concentration, induced magnetic field and electric potential are calculated without approximation using small and long wavelengths with moderate Reynolds numbers.

The Adomian decomposition method solves the nonlinear partial differential equations with related boundary conditions. Graphs and tables show flow features and biophysical factors like shear and normal stresses.

This study found that when curvature and a moderate Reynolds number are present, the non-Newtonian Sutterby fluid raises shear stress across all domains due to velocity decay, resulting in high shear stress. Additionally, modest mobility increases shear stress across all channel domains. The Sutterby parameter causes fluid motion resistance, which results in low energy generation and a decrease in the temperature distribution.

Equations of motion, energy equation, nanoparticle concentration, induced magnetic field and electric potential for Sutterby nano-fluids are obtained without any approximation i.e. the authors take small and long wavelengths and also moderate Reynolds numbers.

In a number of recent multi-billion dollar cases brought against cigarette manufacturers, plaintiffs have in part alleged that the cigarette manufacturers (1) conspired not to compete on the basis of health claims or the introduction of potentially safer cigarettes since the 1950s, and (2) engaged in fraudulent advertising by making implied health claims in advertisements selling ‘low tar’/‘light’ cigarettes. In this type of litigation, defendants’ actions could be due to alleged illegal behaviour as asserted by plaintiffs, or be the result of market forces that may have nothing to do with allegedly inappropriate acts. We examine the economic evidence relating to these allegations, taking into account some of the major influences on cigarette company behaviour. In particular, our analyses show that much of the cigarette manufactures’ behaviour can be explained by Federal Trade Commission and related government actions, rather than conspiracy or fraudulent acts. We find the economic evidence is inconsistent with an effective conspiracy to suppress information on either smoking and health or the development and marketing of potentially safer cigarettes. Regarding ‘lower tar’ and ‘light’ cigarettes, the economic evidence indicates that the cigarette manufacturers responded to government and public health initiatives, and that disclosing more information on smoking compensation earlier than the cigarette companies did would not have had any significant impact on smoking behaviour.

This paper aims to perform numerical simulations through different shaped double stenoses in a vascular tube for a better understanding of arterial blood flow patterns, and their possible role during the progression of atherosclerosis. The dynamics of flow features have been studied by wall pressure, streamline contour and wall shear stress distributions for all models.

A finite volume method has been employed to solve the governing equations for the two‐dimensional, steady, laminar flow of an incompressible and Newtonian fluid.

The paper finds that impact of pressure drop, reattachment length and peak wall shear stress at each restriction primarily depends upon percentage of restriction, if restriction spacing is sufficient. The quantum of impact of pressure drop, reattachment length and peak wall shear stress is much effected for smaller restriction spacing. If recirculating bubble of first restriction merges with the recirculating bubble formed behind the second restriction in this smaller restriction spacing. The similar effect of smaller restriction spacing is observed, if Reynolds number increases also.

The effect of different shaped stenoses, restriction spacing and Reynolds number on the flow characteristics has been investigated and the role of all the flow characteristics on the progression of the disease, atherosclerosis, is discussed.

The purpose of this paper is to study the laminar boundary layer flow between a stationary nonporous disk and a porous rotating disk, both being immersed in large amount of fluid.

The governing nonlinear momentum equations in cylindrical polar coordinates together with relevant boundary conditions are reduced to a system of coupled nonlinear ordinary differential equations (NODEs) using similarity transformations. The resulting coupled NODEs are solved using computer-extended series solution and homotopy analysis method.

The analytical solutions are explicitly expressed in terms of recurrence relation for determining the universal coefficients. The nature and location of singularity which restricts the convergence of series is analyzed by using Domb–Sykes plot. Reversion of series is used for the improvement of series. The region of validity of series is extended for much larger values of Reynolds number (R), i.e. R = 6 to 15.

The resulting solutions are compared with earlier works in the literature and are found to be in good agreement.

THIS paper aims at giving the most important results of modern German research upon the motion of incompressible fluids. Before dealing with the latest developments, I have thought it advisable to give a short account of the older researches upon which the present work is based. It is hoped that this résumé will give a fairly complete survey of the methods that have led to the present insight into the hydrodynamical mechanism.

This paper aims to investigate the consequence of the combined impacts of an induced magnetic field and thermal radiation on peristaltic transport of a Carreau nanofluid in a vertical tapered asymmetric channel. The model applied for the nanofluid comprises the effects of Brownian motion and thermophoresis.

The governing equations have been simplified under the widespread assumption of long-wavelength and low-Reynolds number approximations. The reduced coupled nonlinear equations of momentum and magnetic force function have also been solved analytically using the regular perturbation method.

The physical features of emerging parameters have been discussed by drawing the graphs of velocity, temperature, nanoparticle concentration profile, magnetic force function, current density, heat transfer coefficient and stream function. It has been realized that the magnetic force function is increased with the increase of Hartmann number, magnetic Reynolds number and mean flow rate.

It may be first paper in which the effect of induced magnetic field on peristaltic flow of non-Newtonian nanofluid in a tapered asymmetric channel has been studied.

The behaviors of sea surface drag coefficient should be well understood for an accurate hurricane prediction. The speed of wind has been applied to characterize the spray production; however, this could result in inaccurate spray productions compared to the experimental or field data if the influence of wave state is not considered. This paper aims to integrate a new sea spray generation function, described by windsea Reynolds number, into the spray momentum flux formula to calculate the spray momentum.

On the basis of this spray momentum, this study proposes the new formulas of spray stress and drag coefficient when the wind speed is high.

Results of the revised formulas show that wave status had significant effects on the spray stress and sea surface drag coefficient. Also, wave age was found to be an important parameter that affects the drag coefficient. The drag coefficient decreased with the increasing wave age. Comparison between this study’s theoretical and observation values of drag coefficient shows that the study results are close to the measured values.

The research findings can enhance the understanding of the behaviors of sea surface drag for an accurate hurricane prediction.

A new sea spray generation function, described by windsea Reynolds number, is integrated into the spray momentum flux formula to calculate the spray momentum. On the basis of this spray momentum, this study proposes the new formulas of spray stress and drag coefficient when the wind speed is high.

The present work aimed to study analytically the influence of wear on the performance of a capillary-compensated hole-entry hybrid misaligned journal bearing system operating in a turbulent regime. The numerically simulated results are presented for the chosen values of restrictor design parameter, Reynolds numbers, wear depth and misalignment parameters.

The wear caused on the bearing surface due to start/stop operations is modeled using the Dufrane’s abrasive wear model. The modified Reynolds equation based on Constantinescu’s lubrication theory is solved using finite element method together with capillary restrictor flow equation.

It is found that the value of minimum fluid-film thickness increases significantly for a constant value of restrictor design parameter when unworn aligned bearing operates in turbulent regime vis-à-vis laminar regime. Further, it has also been observed that when a worn bearing operates in laminar/turbulent regimes, the reduction in the value of minimum fluid-film thickness is more due to journal misalignment as compared to the aligned bearing operates in laminar regime.

The present work is original concerning the performance of worn hole-entry hybrid misaligned journal bearing system operating in turbulent regime. The results are expected to be quite useful for the bearing designer.

This paper aims to study the two-dimensional steady magneto-hydrodynamic flow of a second-grade fluid in a porous channel using the homotopy perturbation method (HPM).

The governing Navier–Stokes equations of the flow are reduced to a third-order nonlinear ordinary differential equation by a suitable similarity transformation. Analytic solution of the resulting differential equation is obtained using the HPM. Mathematica software is used to visualize the flow behavior. The effects of the various parameters on velocity field are analyzed through appropriate graphs.

It is found that x component of the velocity increases with the increase of the Hartman number when the transverse direction variable ranges from 0 to 0.2 and the reverse behavior is observed when transverse direction variable takes values between 0.2 and 0.5. It is noted that the y component of the velocity increases rapidly with the increase of the transverse direction variable. The y component of the velocity increases marginally with the increase of the Hartman number M. The effect of the Reynolds number R on the x and y components of the velocity is quite opposite to the effect of the Hartman number on the x and y components of the velocity and the effect of the parameter on the x and y components of the velocity is similar to that of the Reynolds number.

To the best of the author’s knowledge, nobody had tried before two-dimensional steady magneto-hydrodynamic flow of a second-grade fluid in a porous channel using the HPM.

The purpose of this paper is the theoretical presentation of tensorial formulation with surface mobility forces and numerical verification of Reynolds thermal transpiration law in a contemporary experiment with nanoflow.

The velocity profiles in a single microchannel are calculated by solving the momentum equations and using thermal transpiration force as the boundary conditions. The mass flow rate and pressure of unstationary thermal transpiration modeling of the benchmark experiment has been achieved by the implementation of the thermal transpiration mobility force closure for the thermal momentum accommodation coefficient.

An original and easy-to-implement method has been developed to numerically prove that at the final equilibrium, i.e. zero-flow state, there is a connection between the Poiseuille flow in the center of channel and counter thermal transpiration flow on the surface. The numerical implementation of the Reynolds model of thermal transpiration has been performed, and its usefulness for the description of the benchmark experiment has been verified.

The simplified procedure requires the measurement or assumption of the helium-glass slip length.

The procedure can be very useful in the design of micro-electro-mechanical systems and nano-electro-mechanical systems, especially for accommodation pumping.

The paper discussed possible constitutive equations in the transpiration shell-like layer. The new approach can be helpful for modeling phenomena occurring at a fluid–solid phase interface at the micro- and nanoscales.