Search results

This study aims to create an efficient approach to validate building energy simulation models amidst challenges from time-intensive data collection. Emphasizing precision in model calibration through strategic short-term data acquisition, the systematic framework targets critical adjustments using a strategically captured dataset. Leveraging metrics like Mean Bias Error (MBE) and Coefficient of Variation of Root Mean Square Error (CV(RMSE)), this methodology aims to heighten energy efficiency assessment accuracy without lengthy data collection periods.

A standalone school and a campus facility were selected as case studies. Field investigations enabled precise energy modeling, emphasizing user-dependent parameters and compliance with standards. Simulation outputs were compared to short-term actual measurements, utilizing MBE and CV(RMSE) metrics, focusing on internal temperature and CO₂ levels. Energy bills and consumption data were scrutinized to verify natural gas and electricity usage against uncertain parameters.

Discrepancies between initial simulations and measurements were observed. Following adjustments, the standalone school 1’s average internal temperature increased from 19.5 °C to 21.3 °C, with MBE and CV(RMSE) aiding validation. Campus facilities exhibited complex variations, addressed by accounting for CO₂ levels and occupancy patterns, with similar metrics aiding validation. Revisions in lighting and electrical equipment schedules improved electricity consumption predictions. Verification of natural gas usage and monthly error rate calculations refined the simulation model.

This paper tackles Building Energy Simulation validation challenges due to data scarcity and time constraints. It proposes a strategic, short-term data collection method. It uses MBE and CV(RMSE) metrics for a comprehensive evaluation to ensure reliable energy efficiency predictions without extensive data collection.

Simulation is a well-known technique for using computers to imitate or simulate the operations of various kinds of real-world facilities or processes. The facility or process of interest is usually called a system, and to study it scientifically, we often have to make a set of assumptions about how it works. These assumptions, which usually take the form of mathematical or logical relationships, constitute a model that is used to gain some understanding of how the corresponding system behaves, and the quality of these understandings essentially depends on the credibility of given assumptions or models, known as VV&A (verification, validation and accreditation). The main purpose of this paper is to present an in-depth theoretical review and analysis for the application of VV&A in large-scale simulations.

After summarizing the VV&A of related research studies, the standards, frameworks, techniques, methods and tools have been discussed according to the characteristics of large-scale simulations (such as crowd network simulations).

The contributions of this paper will be useful for both academics and practitioners for formulating VV&A in large-scale simulations (such as crowd network simulations).

This paper will help researchers to provide support of a recommendation for formulating VV&A in large-scale simulations (such as crowd network simulations).

The research aims to show that validation and legitimisation of an information systems (IS) project need to be treated simultaneously to improve software project management. A starting assumption is that traditional aspects of model validity and legitimisation in operational research can be applicable to the field of IS. However, non‐traditional types of IS are more suitable to be viewed from an interpretive viewpoint. Validation is explored both from hard systems and also from soft systems point of view. Some extensions on the notion of validation for soft systems are provided for that purpose. Issues regarding both validation and legitimisation in IS are illustrated on a case study regarding the management of an academic research management IS project. Issues related both validation and legitimisation in IS are illustrated on a case study regarding the management of an academic research IS project. The latter had eventually to be abandoned. The case study shows how the non‐adherence to the principles of validation and legitimisation lead to that situation.

The purpose of this paper is to propose a system dynamic simulated process model for maintenance work management incorporating the Fourth Industrial Revolution (4IR) technologies.

The extant literature in physical assets maintenance depicts that poor maintenance management is predominantly because of a lack of a clearly defined maintenance work management process model, resulting in poor management of maintenance work. This paper solves this complex phenomenon using a combination of conceptual process modeling and system dynamics simulation incorporating 4IR technologies. A process for maintenance work management and its control actions on scheduled maintenance tasks versus unscheduled maintenance tasks is modeled, replicating real-world scenarios with a digital lens (4IR technologies) for predictive maintenance strategy.

A process for maintenance work management is thus modeled and simulated as a dynamic system. Post-model validation, this study reveals that the real-world maintenance work management process can be replicated using system dynamics modeling. The impact analysis of 4IR technologies on maintenance work management systems reveals that the implementation of 4IR technologies intensifies asset performance with an overall gain of 27.46%, yielding the best maintenance index. This study further reveals that the benefits of 4IR technologies positively impact equipment defect predictability before failure, thereby yielding a predictive maintenance strategy.

The study focused on maintenance work management system without the consideration of other subsystems such as cost of maintenance, production dynamics, and supply chain management.

The maintenance real-world quantitative data is retrieved from two maintenance departments from company A, for a period of 24 months, representing years 2017 and 2018. The maintenance quantitative data retrieved represent six various types of equipment used at underground Mines. The maintenance management qualitative data (Organizational documents) in maintenance management are retrieved from company A and company B. Company A is a global mining industry, and company B is a global manufacturing industry. The reliability of the data used in the model validation have practical implications on how maintenance work management system behaves with the benefit of 4IR technologies' implementation.

This research study yields an overall benefit in asset management, thereby intensifying asset performance. The expected learnings are intended to benefit future research in the physical asset management field of study and most important to the industry practitioners in physical asset management.

This paper provides for a model in which maintenance work and its dynamics is systematically managed. Uncontrollable corrective maintenance work increases the complexity of the overall maintenance work management. The use of a system dynamic model and simulation incorporating 4IR technologies adds value on the maintenance work management effectiveness.

Bayesian approaches have been widely applied in construction management (CM) research due to their capacity to deal with uncertain and complicated problems. However, to date, there has been no systematic review of applications of Bayesian approaches in existing CM studies. This paper systematically reviews applications of Bayesian approaches in CM research and provides insights into potential benefits of this technique for driving innovation and productivity in the construction industry.

A total of 148 articles were retrieved for systematic review through two literature selection rounds.

Bayesian approaches have been widely applied to safety management and risk management. The Bayesian network (BN) was the most frequently employed Bayesian method. Elicitation from expert knowledge and case studies were the primary methods for BN development and validation, respectively. Prediction was the most popular type of reasoning with BNs. Research limitations in existing studies mainly related to not fully realizing the potential of Bayesian approaches in CM functional areas, over-reliance on expert knowledge for BN model development and lacking guides on BN model validation, together with pertinent recommendations for future research.

This systematic review contributes to providing a comprehensive understanding of the application of Bayesian approaches in CM research and highlights implications for future research and practice.

The authors aim to develop a conceptual framework for longitudinal estimation of stress-related states in the wild (IW), based on the machine learning (ML) algorithms that use physiological and non-physiological bio-sensor data.

The authors propose a conceptual framework for longitudinal estimation of stress-related states consisting of four blocks: (1) identification; (2) validation; (3) measurement and (4) visualization. The authors implement each step of the proposed conceptual framework, using the example of Gaussian mixture model (GMM) and K-means algorithm. These ML algorithms are trained on the data of 18 workers from the public administration sector who wore biometric devices for about two months.

The authors confirm the convergent validity of a proposed conceptual framework IW. Empirical data analysis suggests that two-cluster models achieve five-fold cross-validation accuracy exceeding 70% in identifying stress. Coefficient of accuracy decreases for three-cluster models achieving around 45%. The authors conclude that identification models may serve to derive longitudinal stress-related measures.

Proposed conceptual framework may guide researchers in creating validated stress-related indicators. At the same time, physiological sensing of stress through identification models is limited because of subject-specific reactions to stressors.

Longitudinal indicators on stress allow estimation of long-term impact coming from external environment on stress-related states. Such stress-related indicators can become an integral part of mobile/web/computer applications supporting stress management programs.

Timely identification of excessive stress may improve individual well-being and prevent development stress-related diseases.

The study develops a novel conceptual framework for longitudinal estimation of stress-related states using physiological and non-physiological bio-sensor data, given that scientific knowledge on validated longitudinal indicators of stress is in emergent state.

Automatic modulation recognition (AMR) is a challenging problem in intelligent communication systems and has wide application prospects. At present, although many AMR methods based on deep learning have been proposed, the methods proposed by these works cannot be directly applied to the actual wireless communication scenario, because there are usually two kinds of dilemmas when recognizing the real modulated signal, namely, long sequence and noise. This paper aims to effectively process in-phase quadrature (IQ) sequences of very long signals interfered by noise.

This paper proposes a general model for a modulation classifier based on a two-layer nested structure of long short-term memory (LSTM) networks, called a two-layer nested structure (TLN)-LSTM, which exploits the time sensitivity of LSTM and the ability of the nested network structure to extract more features, and can achieve effective processing of ultra-long signal IQ sequences collected from real wireless communication scenarios that are interfered by noise.

Experimental results show that our proposed model has higher recognition accuracy for five types of modulation signals, including amplitude modulation, frequency modulation, gaussian minimum shift keying, quadrature phase shift keying and differential quadrature phase shift keying, collected from real wireless communication scenarios. The overall classification accuracy of the proposed model for these signals can reach 73.11%, compared with 40.84% for the baseline model. Moreover, this model can also achieve high classification performance for analog signals with the same modulation method in the public data set HKDD_AMC36.

At present, although many AMR methods based on deep learning have been proposed, these works are based on the model’s classification results of various modulated signals in the AMR public data set to evaluate the signal recognition performance of the proposed method rather than collecting real modulated signals for identification in actual wireless communication scenarios. The methods proposed in these works cannot be directly applied to actual wireless communication scenarios. Therefore, this paper proposes a new AMR method, dedicated to the effective processing of the collected ultra-long signal IQ sequences that are interfered by noise.

The systemic sciences, be they politico‐socio‐econometric, medico‐systemic, psycho‐neurological, or ecologico‐environmental, must be founded on a computer science that permits not only the expeditious and conscientious modelling of collections of natural phenomena, but also a methodology which ensures that computerized simulation models are stringently verified and assiduously validated by both their authors and their critics. The paper delineates the operational procedure by which simulation models can be well‐written, yet, despite their complexity, subjected to the scrutiny of the entire scientific community in order that they be deemed credible mimics of the complex systems that they describe. The important aspects and evolutionary development of computational linguistics are placed in the context of providing ad hoc simulation languages especially amenable to the systemic scientist. In this context, the role, and value of the use of, the telecommunications technology to the verification and validation of the computerized models of the systemic scientists are delineated.

In this paper, we discuss the application of the constitutive relation error (CRE) to model updating and validation in the context of uncertain measurements. First, a parallel is drawn between the CRE method and a general theory for inverse problems proposed by Tarantola. Then, an extension of the classical CRE method considering uncertain measurements is proposed. It is shown that the proposed mechanics‐based approach for model validation is very effective in filtering noise in the experimental data. The method is applied to an industrial structure, the SYLDA5, which is a satellite support for Ariane5. The results demonstrate the robustness of the method in actual industrial situations.

The purpose of this paper is to find good values of onsite-offshore team strength; number of hours of communication between business users and onsite team and between onsite and offshore team so as to reduce project cost and improve schedule in a global software development (GSD) environment for software development project.

This study employs system dynamics simulation approach to study software project characteristics in both co-located and distributed development environments. The authors consulted 14 experts from Indian software outsourcing industry during our model construction and validation.

The study results show that there is a drop in overall team productivity in outsourcing environment by considering the offshore options. But the project cost can be reduced by employing the offshore team for coding and testing work only with minimal training for imparting business knowledge. The research results show that there is a potential to save project cost by being flexible in project schedule.

The implication of the study is that the project management team should be careful not to keep high percentage of manpower at offshore location in distributed software environment. A large offshore team can increase project cost and schedule due to higher training overhead, lower productivity and higher error proneness. In GSD, the management effort should be to keep requirement analysis and design work at onsite location and involves the offshore team in coding and testing work.

The software project manager can use the model results to divide the software team between onsite and offshore location during various phases of software development in distributed environment.

The study is novel as there is little attempt at finding the team distribution between onsite and offshore location in GSD environment.