Search results

The wax deposition in oil wells and pipelines is very viciously negative to the petroleum extraction and crude oil transportation, and it even causes severe blockage accident. This study aims to describe cleaning experiments performed on wax deposition of different deposition layer and experimental conditions to investigate the removal and tribological properties and chip formation.

An optical arrangement was used to visually record the cleaning process, whereas the friction forces were measured by a custom-built tribometer. Various measurements were performed with tool rake angles of 45° and −30° and cleaning depths from 1 to 5 mm.

Results from experiments and modeling suggest that the transition of chip was dependent on rake angle, wax performance and cleaning depth. While the cleaning depth increased, the friction and cleaning resistant force also increased. With the increase of cleaning depth, the wax layer cleaning quantity increased and the chip strengthened; hence, the curvature radius of chip was enhanced to form platy chip. The chip of wax–oil mixture was discontinuous units, and it was easy to adhere on the rake face with the increasing depth of cut. With an increase in cleaning depth, the friction and cleaning-resistant force also increased.

It is concluded that for effectively cleaning and stabilizing of pipeline cleaning machine, different cleaning parameters should be applied to accommodate wax layer or wax–oil mixture.

This paper aims to focus on the high-speed rotary lip seal in aircraft engines, combining its service parameters, its own structure and application conditions, to study the influence of different eccentric forms, eccentricity, rotational speed and other factors on the performance of the rotary lip seal.

A numerical simulation model for high-speed eccentric rotary lip seals has been developed based on the theory of elastic hydrodynamic lubrication. This model comprehensively considers the coupling of multiple physical fields, including interface hydrodynamics, macroscopic solid mechanics and surface microscopic contact mechanics, under the operating conditions of rotary lip seals. The model takes into account eccentricity and uses the hazardous cross-sectional method to quantitatively predict sealing performance parameters, such as leakage rate and friction force.

Eccentricity has a large impact on lip seal performance; lips are more susceptible to wear failure under static eccentricity and to leakage failure under dynamic eccentricity.

This study provides a new idea for the design of rotary lip seal considering eccentricity, which is of guiding significance for the engineering application of rotary lip seal.