Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

Corporate social responsibility (CSR) is regarded as the driving factor of innovation. However, corporate technological innovation social responsibility’s (CTISR) role and effect mechanism in leveraging radical technological innovation (RTI) has been limited. The purpose of this study is to investigate the relationships between CTISR and RTI and the moderating effect of intellectual capital and institutional support on CTISR and RTI.

Grounded in resource-based view, a research model including CTISR, intellectual capital, institutional support and RTI is proposed Content analysis is performed on the CSR reports of Chinese companies that have been publicly listed published from 2008 to 2022, to measure each company’s CTISR. A regression analysis was then applied to relate CTISR, intellectual capital and institutional support to firm-specific variables to determine their relevance and influence on RTI.

Results indicate that CTISR is positively related to RTI. The results also indicate that human capital, structural capital and institutional support strengthen this positive relationship. Furthermore, institutional support strengthens the positive interaction effect of human capital with CTISR and structural capital with CTISR, respectively.

This research explores the relationships among CTISR, intellectual capital, institutional support and RTI in a comprehensive model, which is the first known study to highlight that CTISR can enhance RTI and gives managers implications on how to align corporate technological innovation while pursuing RTI.

Given the progressive rise of online health communities (OHC) that have predominantly changed health delivery services, healthcare organizations still face tremendous challenges of low patient participation and lack of high-quality contribution to OHC. Prior scholars indicated that inducing patient value co-creation behavior (VCB) is substantially beneficial for the sustainable growth of OHCs. However, what drives patients' behavior to co-create value is still unknown. To fill this important gap, this study used the service-dominant logic of value co-creation theory and face (mianzi in Chinese) literature to discover how patient co-creation attitude (CA) affects patient VCB. Also, this study aimed to explore the joint mechanism of how face gain (FG) and face loss (FL) impact patients' VCB in OHCs.

The survey data of 322 patients actively using OHC in China were analyzed via partial least squares structural equation model (PLS-SEM) and fuzzy set qualitative comparative analysis (fsQCA).

The results revealed that patient CA positively influences VCB, that is participation behavior (PB) and citizenship behavior (CB). Face gain (FG) strengthens the impact of CA and patient PB and CB, whereas face loss (FL) weakens the impact of CA and patient PB and CB. Furthermore, the fsQCA findings signify the robustness of the study model.

This study explores the multifaceted mechanism of patient value co-creation in OHC and discloses the crucial role of face for the first time. Further, the novel findings of this study provide a robust framework for advancing the understanding of important drivers of patient VCBs that significantly helps healthcare service providers and OHC managers to sustain OHCs.

Despite the extensive body of research on absolute corporate social responsibility (CSR) performance, limited attention has been given to the distinct concepts of optimal and aggressive CSR engagement, as well as their associations with CSR awarding. This study aims to differentiate between optimal and aggressive CSR engagement and examine their relationship with CSR awarding while considering the moderating influence of board characteristics from the perspectives of stakeholder and agency theories.

This empirical analysis draws on an international dataset comprising 43,803 observations from nine sectors across 41 countries. We employ a least squares dummy variable regression approach that accounts for country, industry and year effects to conduct the analysis.

The results reveal that engagement in aggressive CSR activities beyond the optimal level leads to the generation of a social reputation through CSR awarding. However, the influence of board characteristics on this relationship is significant. Specifically, the presence of a dedicated CSR committee encourages CSR awarding in the context of aggressive CSR engagement. Conversely, board independence constrains the relationship between aggressive CSR engagement and CSR awarding. Notably, board gender diversity does not have a discernible impact on this connection.

Our evidence provides valuable insights to help firms seeking to enhance their social reputation through CSR activities better allocate their resources and avoid unnecessary financial commitments.

This study advances the current understanding by exploring the relationship between aggressive CSR engagement and the recognition of CSR awards. Furthermore, it scrutinises the factors that dictate when such aggressive CSR engagement translates into enhanced social reputation, as evidenced by the attainment of CSR awards.

The paper proposes a two-level closed-loop supply chain (CLSC) dynamic competitive model based on different competitive cooperation situations, and explores the impact of competitive cooperation methods on the pricing strategies, recycling and remanufacturing strategies and competitive model selection strategies of supply chain firms.

This paper establishes a CLSC game consisting of a manufacturer and two retailers. Firstly, five CLSC models are established in both horizontal and vertical dimensions, each of which competes with one another. Secondly, the recycling and remanufacturing pricing strategies are analyzed under different competition or cooperation models. Finally, the results are verified through numerical analysis.

The overall profitability of the CLSC is highest when the manufacturer–retailer partnership alliance is in place. The relationship between retailers and manufacturers is also found to be the best way to achieve overall optimization of the CLSC.

The paper investigates the relationship between the competitive partnership and the total profit of the CLSC, taking into account how to optimize the overall benefit, and focusing on how to optimize the individual interests of each participating enterprise. The results can provide basis and guidance for managers' pricing decision and competition cooperation.

In public health emergencies, seeking confirmed cases’ activity trajectory information (CCATI) is crucial to the public’s efforts to combat the epidemic. The public can stabilize their sentiments and mitigate the risk of cross-infection by obtaining CCATI. We investigated the factors influencing users' intentions to seek CCATI to enhance the government’s risk communication capabilities and improve information platform services.

We analyzed how information ecological factors affect the intention to seek CCATI through perceived value. Data was collected from 429 Chinese citizens during the fourth wave of the coronavirus disease 2019 (COVID-19) pandemic. We used the structural equation model technology and bootstrap mediation effect test to examine the model.

Information understandability, information relevance, perceived severity and perceived vulnerability directly and positively affect the intention of seeking CCATI. While, the above relationships are also partially mediated by emotional value and functional value. Social support directly and negatively affects the intention of seeking CCATI, while the relationship is also partially mediated by emotional value and functional value. Curiosity directly and positively affects the intention of seeking CCATI, while the relationship is also partially mediated by emotional value. The relationship between the quality of the search service and the intention of seeking CCATI is not significant, instead, it is fully mediated by functional value. The influence effect of information relevance on the intention of seeking CCATI is the greatest, followed by perceived vulnerability. The mediating effect of functional value is higher than emotional value.

The findings may help governments enhance their risk communication capabilities and improve epidemic prevention and control measures, enhancing the appeal of information platforms.

We focused on CCATI, an area with limited scholarly attention. We analyzed CCATI-seeking factors using an information ecology theory, introducing perceived value as a mediator, thus offering novel perspectives and models.

Prefabricated construction (PC) can benefit construction industry due to its high efficiency, energy saving, consumption reduction and safety. However, the high capital cost is a critical challenge hindering its development in China. The collaboration of PC stakeholders is conducive to improving cost management efficiency and optimizing resource allocation which has been ignored in previous studies. Therefore, this study aims to explore the collaboration paths of stakeholders in the process of solving critical cost influencing factors (CIFs) of PC to reduce costs.

Firstly, 25 CIFs and five main stakeholders that affect PC capital cost were identified through literature research and expert interviews. Then, questionnaires were used to investigate the relationship between stakeholders and CIFs from the perspectives of three stakeholder attributes of proximity, attitude and power, respectively. Finally, based on the survey data, three stakeholder-CIF networks from three attributes perspective and a comprehensive network were constructed and used for subsequent social network analysis.

(1) Stakeholders mainly show willingness and potential to collaborate on organization and management factors; (2) More stakeholders pay attention to incentive policies and the setting of prefabrication rates and assembly rates, while all stakeholders have the right to facilitate information and resource sharing in the PC supply chain; (3) The comprehensive network shows a core-periphery structure. As core stakeholders, contractor, designer and manufacturer are more likely to actively manage the 14 core CIFs.

This paper innovatively combined stakeholder and cost management in PC, and used two-mode network based on three stakeholder perspectives to reveal the collaboration potential and motivation of stakeholders in PC cost management. The findings not only provide guidance for stakeholders to find potential partners and optimize resource allocation in solving specific cost issues, but also facilitate stakeholders' sustainable collaboration to achieve PC's cost performance.

From the perspective of local government tax administration, the impact of geographic dispersion on the corporate tax burden is investigated in this paper.

Using unbalanced panel data with a sample of listed companies from 2003 to 2020 in China, this paper focuses on the effect of geographic dispersion on corporate tax burden and the mechanisms.

It is found that corporate tax burden is positively related to geographic dispersion. It is also found that geographic dispersion affects the corporate tax burden by increasing the effort of local government tax administration. In addition, the relation between geographic dispersion and corporate tax burden is more pronounced for local SOEs prior to the implementation of Golden Tax Project III and in cases where local governments face stronger financial pressure to obtain revenue.

This study has important implications for the promotion of the coordinated development of the regional economy, as well as the legalization, modernization and informatization of tax administration.

Establishing and developing digital science and education evaluation platforms (DSEEPs) have several practical implications for the development of China's science, technology and education. Identifying and analyzing the key factors influencing DSEEP user experience (UX) can improve the users' willingness to use the platform and effectively promote its sustainable development.

First, a literature survey, a five-element model of UX and semi-structured interviews were used in this study to develop a DSEEP UX-influencing factor model, which included five dimensions and 22 influencing factors. Second, the model validity was verified using questionnaire data. Finally, the key influencing factors were identified and analyzed using a fuzzy decision-making trial and evaluation laboratory (fuzzy-DEMATEL) method.

Fourteen influencing factors, including diverse information forms and comprehensive information content, are crucial for the DSEEP UX. Its optimization path is “‘Function Services’ → ‘Information Resources’ → ‘Interaction Design’ → ‘Interface Design’ and ‘Visual Design’.” In this regard, platform managers can take the following measures to optimize UX: strengthening functional services, improving information resources, enhancing the interactive experience and considering interface effects.

This study uses a combination of qualitative and quantitative research methods to determine the key influencing factors and optimization path of DSEEP UX. Optimization suggestions for UX are proposed from the perspective of platform managers, who provide an effective theoretical reference for innovating and developing a DSEEP.

The digital economy has become a new engine for economic development, promoting the upgrading and transformation of traditional industries as well as fostering emerging industries and forms of business. Nonetheless, how does the digital economy affect innovation? The research objective is to explore the specific impact of the digital economy on innovation output.

This paper innovatively adopts the dynamic panel data model (DPDM) to carry out an empirical study on the impact of the digital economy on innovation output, through the observation of 30 provincial-level administrative regions in China. Furthermore, the paper innovatively analyzes the impact of different dimensions of the digital economy on innovation output and the impact of the digital economy on different dimensions of innovation output.

It is found that the digital economy is conducive to boosting innovation output considering innovation continuity. Specifically, the driving impact of core industries and enterprise application of digital economy on innovation output is more prominent, but the driving impact of infrastructure and personal application on innovation output is not fully played. Meanwhile, the driving impact of the digital economy on the innovation output quality is more significant than that digital economy on the innovation output quantity.

This study employs a DPDM for the first time to investigate the specific impact of the digital economy on innovation output, and contributes to the existing literature on the digital economy and digital economy-driven innovation. The findings offer a comprehensive explanation for the impact of the digital economy on innovation output, which has reference value for the formulation of innovation policies driven by digital economy, thereby providing impetus for the sustained and stable development of China's economy.